Making your data centre greener
Published: 16 Jul 2007 16:33 BST
While IT may not rival jet travel for damage to the environment, there's plenty the industry could be doing to lessen its impact on the planet. The good news is that the process of making IT green has already started, but there's still a long way to go. It's not just about using less electricity, either.
Consumer PCs contribute the lion's share of greenhouse gas emissions, and corporate data centres are also significant energy users. But there is a growing industry trend, pushed by vendors such as HP, IBM and Sun, to make corporate server systems more energy efficient. The perfect green data centre would use only sustainable materials and a minimum of energy from renewable sources, and it would be completely recyclable at the end of its useful life. This dream has yet to be realised, but a combination of product research and careful management is helping to make it more of a reality.
A data centre affects the environment throughout its life, from manufacture to disposal. The specific elements that need to be taken into account in any environmental assessment are:
- Raw materials
- Manufacturing by-products
- Embodied energy
- Transportation
- Energy consumption
- Heat output/cooling requirements
- End-of-life removal
- Recycling/disposal
The raw materials that go into a server range from metals, to plastics, to more exotic compounds used in semiconductors. Metals form the bulk of these, and it should be possible to use recycled supplies. Much of the steel and aluminium in a server may already come from recycled materials.
Only by making sure servers are fully utilised can companies hope to improve their efficiency
There are other chemicals used in the manufacture of IT equipment that don't end up in the machines themselves, such as solvents used in cleaning. Although these are unlikely to be discharged into the environment, since most western countries now have laws forbidding such activity, they still have to be produced and disposed of once exhausted. Eliminating the need to use them in the first place by using environmentally inert alternatives is greener.
The law is now much stricter on hardware manufacturers. The Restriction of Hazardous Substances (RoHS) directive, which controls the level of hazardous chemicals a product can contain, came into force in 2006, and the Waste Electrical and Electronic Equipment (WEEE) directive was finally fully enforced in July this year.
Before servers are ever switched on, the actual process of shipping them to a customer site has an environmental impact. If the machines are being manufactured in another country, then there's the additional energy needed to ship it to this country, which will almost certainly use fossil fuels. Green-minded IT purchasers should ask vendors where servers were originally manufactured, and how many intermediate journeys they'll make between the plant and the final data centre.
The most obvious impact a data centre has, and one that companies probably have the greatest imperative to control, is its power consumption. While there are power-saving features in most new servers, and some vendors are even bringing out lower power consumption models, the truth is that even when idling, servers still use a significant percentage of their full power requirement. Only by making sure servers are fully utilised can companies hope to improve their efficiency.
So what can you do to make your data centre greener? Here are a few suggestions.
1. Don't over-specify hardware
While it's tempting to get more processing power, network ports or cooling capacity than required, with a little planning it's unnecessary. If you find yourself needing more capacity in less time than it takes to deliver a new server, you haven't been keeping an eye on your utilisation properly. Not going overboard on the hardware is the single greatest environmental step you can take: a server you don't buy doesn't require raw materials, doesn't have any manufacturing by-products, doesn't need any energy to run it, and doesn't need disposing of.
As well as only buying as many servers as you really need, don't oversize other infrastructure such as air conditioning and uninterruptible power supplies (UPS). UPS in particular shouldn't be oversized since they contain lead-acid batteries that need careful environmental management at the end of their useful life. The temptation is to get a larger UPS — or a UPS with an extended battery — to get greater autonomy time (how long the UPS can support its load on batteries), but for the number of times you'll encounter a power cut of more than a few minutes, it's almost certainly not worth it. If you do need your systems to run for very long times in the absence of mains electricity, get a generator (and run it on biofuel).
2. Check your server manufacturer's environmental policy
While much of what's in a company's policy will be generic enough to be of little use, it should list any certification the company has qualified for, such as the ISO 14000 standards for environmental management. This is the only way you have any control over those first few points in the environmental checklist. Don't be fooled by "greenwash", either — phrases that talk about what the company would like to do or is seeking to do are worthless — you need to know what the company is doing right now.
You also need to check where your chosen server vendor will manufacture the machines you buy from them. If it's outside the EU, the chances are...
Previous
Did you find this article useful?
7 out of 9 people found this useful
Digg
Slashdot
Del.ici.ous
Stumble
Reddit
